Checkout using your account
Checkout as a new customer
Creating an account has many benefits:
In stock
Brand | Ecostrad |
---|---|
Product Weight (kg) | 8.6 |
Depth (mm) | 25 |
Height (mm) | 605 |
Width (mm) | 1005 |
Wattage (w) | 450 |
Cable Length (m) | 1.9 |
Suitable for Bathrooms | Zone 2 and 3 |
IEC Class Protection | Class I |
Room Size - Modern Insulation (m²) | 9 |
Room Size - Poor Insulation (m²) | 5 |
Colour | White |
View or download the Ecostrad Opus infrared panel manual here.
View or download the IR remote control user manual here.
View or download the Ecostrad Opus datasheet here.
This infrared panel is designed for ceiling mounted fitting; however, it can also be used as a wall mounted solution if desired. Please note that due to its lower wattage, its ‘heats up to’ area will be reduced when used as a wall heater.
The 270w panel can be used in standard office ceiling grids and simply slots into place with no accessories or kits needed. In all other instances, it will need to be purchased with either the direct mounting kit or suspension kit, both of which are sold separately.
Ecostrad Opus IR panels are suitable for use in bathrooms provided they are installed in zones 2 or 3 as per the manufacturer’s guidelines. If they are to be installed in a bathroom, they must always be hardwired into a fused spur by a professional electrician. Always defer to the manufacturer’s guidelines regarding the installation and suitability of their products for use in bathrooms.
If you are planning to install multiple heaters, please consult an electrician beforehand to avoid overloading the ring main of your property. They will be able to provide further advice on your project and hardwire your heaters to the mains.
Comfortably warming rooms up to 9m², the 450w Ecostrad Opus IR Infrared Ceiling Panel is an unassuming heat source that’s ideal for mid-sized rooms. Its ceiling-mounted fitting allows the panel to direct warmth down to living levels whilst also ensuring your room heating is well out of reach.
Opus infrared panels warm spaces using radiant heat, which is absorbed by the brickwork of your property to bring rooms up to comfort temperature. It doesn’t rely on the surrounding air to transfer warmth so no heat is lost through draughts. This means your rooms stay warmer for longer, using less energy in the process. On the inside of the panel is a carbon crystal film element that efficiently emits warmth into the room, and to prevent heat loss, the Opus also contains a layer of polyurethane insulation at the rear. The elements are covered in a special fire-resistant, patented coating which protects the appliance and also increases heat conduction.
The remote control supplied with each Opus IR panel acts as both the room thermostat and the programmer, allowing you to set a custom weekly schedule using its digital interface. You can set an interval Monday to Friday to create start and finish times for your heating during the working week, and set intervals for Saturday and Sunday separately. It also provides access to a comfort override option, as well as open window detection and adaptive start functions. Each remote can be used with any number of Opus IR panels so you can have multiple heaters follow the same routine. If you would prefer to use the heater with an external controller, you can simply use the bypass switch on the rear of the panel which gives you the option of changing your control preference further down the line.
This panel can be installed in two different ways. It can be purchased with a direct mounting kit for a fitting that hugs the ceiling or purchased with a suspension kit so that it can hang down at the height of your choosing.