Herschel iQ T2 Room Thermostat & Receiver
Control all your Herschel heaters from one convenient location using the iQ T2 Room Thermostat. The T2 Thermostat lets you create a heating schedule for every infrared heater in your home and can be paired with an unlimited number of Herschel R2 receivers to easily expand your system. This thermostat and receiver system is WiFi and voice control compatible when used with the Smart Life app.
- Intuitive Wireless Thermostat
- WiFi & Voice Control Ready (with R2 receiver)
- Weekly Programming
- Thermostat Accurate to 0.5 °C
- Control Temperatures from 5 - 35 °C
- Manual & Eco Modes
- Open Window Detection
- Adaptive Start
- Control Unlimited Herschel Heaters
- Wall Mounted or Free Standing Fitting
- Control One or More Heaters
- Handles up to 10 Amps (2300w)
- Heat Boost Button for On-Demand Control
- Additional Receivers Available
More Information Brand Herschel Product Weight (kg) 0.4 Depth (mm) 20 Height (mm) 84 Width (mm) 119 Programmable Yes Manual or Digital Digital Wi-Fi Controllable Yes Touchscreen Yes IP Rating IP20 IEC Class Protection N/A Suitable for Bathrooms Zone 3 Only Maximum Load (Amps) 10 Display LCD Display
Manuals & Installation
View the Herschel iQ T2 Thermostat User Guide here.
View the Herschel iQ R2 Receiver User Guide here.
View more information about the Herschel iQ control system here.
Please note: older T1 and R1 thermostats and receivers are not compatible with the T2 and R2 generation of products.
The T2 thermostat comes with a mounting plate and all of the fittings needed for wall mounted installation. Alternatively, you can use the included stand which allows the thermostat to be moved as you see fit. The thermostat should be placed in a location that provides an accurate temperature reading: away from known hot or cold spots.
The R2 receiver must be hardwired by a professional electrician, who will connect it to your mains and wire it into your heaters. This job is not suitable for DIY.
Both the thermostat and receiver should be located at least 1 metre away from other electrical appliances such as radios, TVs, routers or computers, to prevent disruption to the radio frequency connection.
The thermostat must not be used in a bathroom. Receivers can only be used in bathroom spaces which fall outside the “wet” bathroom zones – in other words, at least 60cm away from any source of running or splashing water. Receivers must not be installed in locations where there is any risk of water contact – whether by dripping, splashing, or touching with wet hands. If in doubt, do not install. Common sense should prevail.
All Herschel iQ units comes with a 2 Year Manufacturer's Warranty. Please note: Building Regs (Part F) since 2006 require new or refurbished bathrooms to possess adequate ventilation (15 litres / second with 15 minute overrun). Where adequate ventilation has not been provided, Herschel cannot accept responsibility for damage caused by moisture in the R2 unit if failure occurs within the warranty period. The warranty for both the T2 thermostat and R2 receiver will be invalidated if they are used with non-Herschel heaters.
Order before 12 pm
for FREE Next Day UK Delivery
This item is available with free next working day delivery. You can choose your delivery date from our calendar at the checkout. Next working day delivery dates are available when you order before 12pm (excluding weekends).
Orders of multiple items may be shipped on a pallet. If you are ordering multiple different items, we will always endeavour to dispatch your goods together. However, separate dispatches may be necessary if the items you have ordered are being shipped from different locations. Check our delivery page or speak to our customer service team for more information.
Please be aware that delivery times and charges may be increased if you want the items delivered to addresses in the Scottish Highlands & Islands, or outside the UK mainland. This will be calculated when you enter your postcode at the checkout.
Easily control all your infrared heaters from one place with the Herschel iQ T2 thermostat and receiver system. With a straightforward interface and optional WiFi control, the T2 thermostat makes it easy, quick, and convenient to control your heating.
What does the Herschel T2 Thermostat do?
With the iQ thermostat and receiver, you can wirelessly control all of your infrared heaters from one central location, either by using the thermostat’s manual interface or the compatible Smart Life WiFi app.
Using the app, you can set your heaters to follow a customisable schedule, and even make changes to your settings when you’re on the move. With WiFi, you have full control at your fingertips so you can keep your running costs low and maximise efficiency. The Smart Life app is voice control compatible, allowing you to use Alexa or Google Home to adjust temperatures or switch your heating on and off without even leaving your seat.
The T2 thermostat includes a manual programming interface that lets you create a custom schedule for the working week, with separate programs for Saturday and Sunday. It also provides access to other energy-saving features like adaptive start, open window detection and an eco mode, which heats at a constant lower temperature.
For additional controllability, each receiver comes with a built-in boost button, so you can enjoy extra warmth without having to change your settings.
How does the Herschel iQ system work?
The T2 thermostat system is comprised of a wireless thermostat which can be paired with as many hardwired receivers as you need. Your heaters wire into the receivers, which communicate with the thermostat via a radio frequency, switching the heaters on and off as required. If you connect this system via WiFi, the R2 receiver acts as a gateway and pairs to the Smart Life app, so that when you make any changes, your heaters will be updated with the new commands instantly. The T2 thermostat and R2 receiver cannot be used separately and both parts are needed for temperature control.
Each receiver can support one or more heaters, with a maximum total load of 10 Amps (2300w in a standard 230V power supply), though please bear in mind that the manufacturer recommends a load of 8.5 Amps (1955W in 230V) if you plan to use your heaters regularly. Every receiver connected to your thermostat will receive the same commands. If you want to heat separate rooms to a different schedule, you will need to purchase multiple T2 thermostats.
This iQ package comes with one T2 thermostat and one R2 receiver. You can purchase additional receivers if you want to control heaters in more than one location using the same thermostat. The iQ system is designed to work with Herschel infrared heaters only. The thermostat is accurate to ±0.5 °C and can control a range of temperatures from 5 – 35 °C.