Herschel California Infrared Heaters

Download the Herschel California Infrared Heater manual here.

Download the Herschel California Infrared Heater datasheet here.

The Herschel California is not suitable for DIY installation and must be installed by a professional electrician. The Herschel California can be wall mounted using the brackets provided or used freestanding when purchased with a compatible stand. Do not use freestanding patio heaters outside during wet weather – always bring them inside if it begins to rain.

Be sure to mount the California in line with the manufacturer’s guidelines: 300mm from the wall, ceiling, or any other structure, no lower than 1.8m from the floor, and at an angle between 0° - 45° to avoid activating the safety tilt switch. Do not mount the California facing down from the ceiling.

Using the Herschel California in an indoor space provides the following heats up to areas:

• 3.5m from the floor – 14m²
• 2.5m from the floor – 8m²

Using the Herschel California in an outdoor space provides the following heats up to areas:

• 3.5m from the floor – 9m²
• 2.5m from the floor – 5m²

Although the heated area reduces as the California is brought closer to the floor, the heat given off intensifies – so please bear this in mind when positioning your infrared heaters. See the Herschel California manual for more information.

The Herschel California has an IP65 rating, protecting it from low-pressure jets of water and the ingress of dust. This IP rating provides adequate protection from the elements but for particularly exposed locations prone to heavy rain and winds, a quartz heater may be a more suitable heating solution.