Ecostrad Thermostrip Infrared Heater - 1.8kW (B-Grade)
This product is B-grade stock. It may have slight aesthetic imperfections or damaged packaging but is otherwise unused. All B-grade products are tested, re-boxed where possible and contain all documents and fixtures required for installation. The condition of individual units can vary so please call us direct on 0330 880 7001 for more information. We're so confident in the quality of our B-grade stock that we offer the same warranty periods on them as we would a new product.
- Discreet, Zero Light Heating
- No Glare Wire Filament Heater
- Elegant Contemporary Design
- Effective All-Day Heating
- Contemporary Style for Modern Spaces
- Robust IP65 Protection
- Discreet Infrared Heat
- Contemporary Matt Finish
- Simple On/Off Control
- Wall or Ceiling Mounted Options
- 1 Year Manufacturer’s Warranty
- For Open-Plan Spaces & Lofty Interiors
- 1200 x 154 x 70mms (WxHxD)
More Information Brand Ecostrad Product Weight (kg) 4.9 Depth (mm) 70 Height (mm) 154 Width (mm) 1200 Wattage (w) 1800 Cable Length (m) 1.8 IP Rating IP65 IEC Class Protection Class I Suitable for Bathrooms Not Suitable Room Size - Modern Insulation (m²) 10 Room Size - Poor Insulation (m²) 6
Manuals & Installation
Download the Ecostrad Thermostrip manual here:
For permanent fitting, the Ecostrad Thermostrip must be installed by a professional electrician as it will need to be hardwired to the mains of your property. This is not a DIY task and should always be left to an expert. If wall mounted, the Thermostrip should always be horizontal with its control panel orientated on the left-hand side. The front face of the heater reaches high temperatures and, in all instances, should never be installed where there is risk of physical contact.
The Thermostrip’s wall brackets are designed so that they can also be used to ceiling mount the heater. Please see the Ecostrad Thermostrip manual for further information. Always ensure that the correct clearance distances are observed: the Thermostrip must be installed no lower than 2.1m from the floor and at least 50cm away from the ceiling and any adjacent walls.
The Thermostrip is designed for indoor application and should not be used in any space that is exposed to gusts and breezes. This is because wind-chill will offset the effects of far infrared heat. It should not be used where there may be persistent draughts: e.g. near roller shutters, doors, windows or outside. If you need a heater for outdoor use, we recommend products in our low-glare patio heater range.
The Ecostrad Thermostrip comes with an IP65 protection rating which means that it is dust-tight and resistant to low pressure jets of water.
Care must always be taken when connecting multiple radiators or heaters to avoid overloading the ring main of your property. If you are unsure, contact a qualified electrician for advice. For a professional installation, cables can be shortened and the heater connected to the mains supply by a fused spur. This work must be carried out by a qualified electrician.
Ecostrad Thermostrip infrared heaters come with a 1 Year Manufacturer’s Warranty.
Order before 2 pm
for FREE Next Day UK Delivery
This item is available with free next working day delivery. You can choose your delivery date from our calendar at the checkout. Next working day delivery dates are available when you order before 2pm (excluding weekends).
Orders of multiple items may be shipped on a pallet. If you are ordering multiple different items, we will always endeavour to dispatch your goods together.
However, separate dispatches may be necessary if the items you have ordered are being shipped from different locations. Check our delivery page or speak to our customer service team for more information.
Please be aware that delivery times and charges may be increased if you want the items delivered to addresses in the Scottish Highlands & Islands, or outside the UK mainland. This will be calculated when you enter your postcode at the checkout.