Ecostrad Accent IR Infrared Ceiling Panel with Remote - 800w (1205 x 905mm) (B-Grade)
This product is B-grade stock. It may have slight aesthetic imperfections or damaged packaging but is otherwise unused. All B-grade products are tested, re-boxed where possible and contain all documents and fixtures required for installation. The condition of individual units can vary so please call us direct on 0330 880 7001 for more information. We're so confident in the quality of our B-grade stock that we offer the same warranty periods on them as we would a new product.
- Comfortable Far Infrared Heat
- Programmable Remote Included
- Adaptive Start & Open Window Detection
- Digital Thermostat Accurate to 0.5 °C
- Recyclable Aluminium Housing
- Slimline 22mm Deep Body
- Patented Fire-Resistant Coating on Element
- In-built Overheat Protection
- Suitable for Domestic & Commercial Properties
- Ceiling Mounting Kits Sold Separately
- 5 Year Warranty on Heater Body
- 1205 x 905 x 22mms (WxHxD)
More Information Brand Ecostrad Product Weight (kg) 10.8 Depth (mm) 22 Height (mm) 905 Width (mm) 1205 Wattage (w) 800 Cable Length (m) 1.9 IP Rating IP54 Suitable for Bathrooms Zone 2 and 3 IEC Class Protection Class I Room Size - Modern Insulation (m²) 16 Room Size - Poor Insulation (m²) 8
Manuals & Installation
View or download the Ecostrad Accent infrared panel manual here.
View or download the IR remote control user manual here.
View or downlaod the Ecostrad Accent infrared panel datasheet here.
These infrared panels are designed for ceiling mounted fitting; however, they can also be used as a wall mounted solution if desired. Please note that due to their lower wattages, their ‘heats up to’ areas will be reduced when used as a wall heater.
The 270w panel can be used in standard office ceiling grids and simply slots into place with no accessories or kits needed. Otherwise, all of the panels will need to be purchased with either the direct mounting kit or suspension kit, both of which are sold separately.
Ecostrad Accent IR panels are suitable for use in bathrooms provided they are installed in zones 2 or 3 as per the manufacturer’s guidelines. If they are to be installed in a bathroom, they must always be hardwired into a fused spur by a professional electrician. Always defer to the manufacturer’s guidelines regarding the installation and suitability of their products for use in bathrooms.
If you are planning to install multiple heaters, please consult an electrician beforehand to avoid overloading the ring main of your property. They will be able to provide further advice on your project and hardwire your heaters to the mains.
The Ecostrad Accent IR Infrared Ceiling Panel has a 5 Year Warranty on the heater body and a separate 1 Year Warranty on the electronic receiver.