Salus RT510RF Wireless Thermostat and 4 Receivers
For effortless controllability of your infrared heaters, the Salus R510RF Thermostat offers complete convenience. This kit includes four receivers, which can be hardwired into the back of your heaters. Featuring weekly programming and six daily temperature intervals, the Salus is ideal for those who want to personalise their heating.
- Wirelessly Controlled Heating
- Weekly Digital Programming
- 6 Daily Temperature Intervals
- Anti-Frost & Holiday Modes
- Heat Boost Function
- Manages 4 Receivers per Thermostat
- Fast Professional Installation
- Freestanding or Wall Mounted Fitting
- Max Load: 16A/3680W
- 1 Year Manufacturer’s Warranty
More Information Brand Salus Product Weight (kg) 1.3 Depth (mm) 150 Height (mm) 150 Width (mm) 230 Dual Control No Programmable Yes Tariff Switching No Manual or Digital Digital Wi-Fi Controllable No Touchscreen No IP Rating IP30 IEC Class Protection N/A Suitable for Bathrooms Not Suitable Maximum Load (Amps) 16 Display LCD Display
Manuals & Installation
The Salus RT510RF Thermostat needs 2xAA batteries for it to work. It can be wall-mounted DIY, or left freestanding. Draughts and bright, direct sunlight can alter the temperature readings, so your thermostat should not be placed in line with these. Radio interference can also occur if the thermostat is installed near computers or TVs. The thermostat frequency ranges at 30m, taking into consideration the possible obstructions caused by furniture or walls.
A professional electrician is required to install all Salus receivers, as they need hardwiring to the mains as well as their respective heaters. Providing they do not exceed a load of 16 Amps (the equivalent of 3680W in a 230V standard supply), receivers can accommodate several heaters. The dimensions of each receiver are 160x150x43mm (WxHxD).
The Salus RT510RF Wireless Thermostat is prohibited to be placed in bathrooms. They should be installed in dry areas, such as hallways. If you are wanting to control infrared panels in your bathroom, however, the panel will have to be wired into the receiver, in a location that falls outside the ‘wet’ bathroom zones – at least 60cm away from any water sources or splashing water. Receivers must be installed in a dry area, away from any risk of water contact. If in doubt, do not install.
All Salus RT510RF Wireless Thermostats and Receivers come with a 1 Year Manufacturer’s Warranty.
The Salus RT510RF Wireless Digital Thermostat is simple to use and designed with your needs in mind, keeping your running costs to a minimum. This kit includes four receivers and is a key accessory for any infrared heating system. It caters to applications both large and small, offering a variety of heat management options and energy-saving features. There’s no need to go through the annoyance of individually programming your infrared heater, as any changes you make via the thermostat are carried via radio frequency to the receivers, removing any difficulties.
The Salus comes with a digital programming function that gives you complete control of your heating system. Create a heating schedule for every day of the week, fully tailored to your needs, with six temperature intervals per day. If you want to create separate heating schedules for weekdays and weekends, the thermostat can alternate between a 5-2 system. A 24hr system is also available if you’d prefer each day programmed individually, and it can control temperatures between 5 - 35 °C. The thermostat also includes a range of other useful functions, including holiday mode, a heat boost function and frost protection mode. The Salus RT510RF comes with a 1 Year Manufacturer’s Warranty.
This Salus wireless thermostat kit comes with four receivers. They can control single, as well as multiple heaters, as long as they don’t exceed a total of 16 Amps (equating to 360W in a standard 230V supply). A single Salus thermostat can accommodate up to four receivers, so providing you have a maximum of four receivers, it may be possible to use a single thermostat as a central controller. If you want a different temperature or heating schedule in separate rooms, or need to use more than four receivers, extra thermostats will need to be purchased.
All heaters must be hardwired to the mains, as well as to the heater/heaters you want them to control. The thermostat can be quickly and easily wall-mounted DIY, and it takes 2xAA batteries. For freestanding fitting, a convenient desk stand is also provided. If you require an additional receiver without purchasing an extra thermostat, please contact our Sales team directly for pricing information.