Checkout using your account
Checkout as a new customer
Creating an account has many benefits:
Call Us
Brand | Ecostrad |
---|---|
Product Weight (kg) | 4.1 |
Depth (mm) | 154 |
Height (mm) | 162 |
Width (mm) | 740 |
Wattage (w) | 1800 |
Cable Length (m) | 1.8 |
IEC Class Protection | Class I |
Suitable for Bathrooms | Not Suitable |
Outdoor Heat Area - Max (m²) | 10 |
Outdoor Heat Area - Min (m²) | 8 |
Room Size - Modern Insulation (m²) | 15 |
Room Size - Poor Insulation (m²) | 12 |
Colour | Black |
View or download the Ecostrad Apex Infrared Patio Heater manual here (without remote).
Download the Ecostrad Apex datasheet here.
Ecostrad Apex patio heaters are compatible with DIY installation and come with a UK moulded plug. If the patio heater is to be installed outside, it must be hardwired safely by a professional electrician.
This heater can be wall or ceiling mounted to achieve the best fitting for your space. It should always be installed as per the manufacturer’s guidelines with all clearance distances adhered to: at least 1.8m from the ground and at least 50cm away from any adjacent walls and surfaces. When wall mounting, always ensure that the unit is horizontally level with the heater’s control panel aligned to the left-hand side. The carbon filament bulb is fragile so please take care when unpacking and installing the heater. In all instances, the heater must be installed in a location where it cannot be accidentally touched as its surface temperature can reach up to 95 °C.
We advise installing the Apex where it will be away from any strong sources of air movement, such as doors and roller shutters. This is because wind chill can offset the sensation of mediumwave infrared on your skin.
Ecostrad Apex Infrared Patio Heaters are rated IP65 which means they are completely dust-tight and protected against low pressure jets of water so you can install them outside with confidence.
The Ecostrad Apex is an electric patio heater designed with an emphasis on comfort. Its superior performance is all down to its cutting-edge carbon filament bulb which provides two distinct benefits. It uses mediumwave infrared to provide a robust heat that’s not overwhelming and also produces significantly less glare in the process. If you’ve always wanted to make your patio somewhere you can relax and unwind at any time of day then the Ecostrad Apex is ideal – just switch it on and you can enjoy effective heat in under 10 seconds.
If you want to install your outdoor heater with an external controller then we recommend this non-remote version of the Apex. You could use it with a timer, dimmer or motion sensor in an outdoor location, or with a thermostat in a hard-to-heat interior like a warehouse or workshop. In an indoor location, the Apex is capable of heating an area up to 15m² and in an outdoor location, it can heat a maximum of 10m². When used without a controller, this heater will operate at its maximum output until switched off.
Each Ecostrad Apex infrared patio heater comes with a 1.8m cable and a UK moulded plug for DIY fitting. If you plan on installing the Apex outside, an electrician will be able to hardwire it to the mains of your property without the need for a lengthy callout.